Qiriu

A candle burning.

Young Man with a Candle by Michel Gobin

Qiriu është një bllok solid dylli me një fitil të ngulitur, e cili i ndezur siguron dritë , and sometimes heat, and historically was used as a method of keeping time.

A candle manufacturer is traditionally known as a chandler. Various devices have been invented to hold candles, from simple tabletop candle holders, to elaborate chandeliers.

For a candle to burn, a heat source (commonly a naked flame) is used to light the candle's wick, which melts and vaporizes a small amount of fuel, the wax. Once vaporized, the fuel combines with oxygen in the atmosphere to form a flame. This flame provides sufficient heat to keep the candle burning via a self-sustaining chain of events: the heat of the flame melts the top of the mass of solid fuel; the liquefied fuel then moves upward through the wick via capillary action; the liquefied fuel finally vaporizes to burn within the candle's flame.

As the mass of solid fuel is melted and consumed, the candle grows shorter. Portions of the wick that are not emitting vaporized fuel are consumed in the flame. The incineration of the wick limits the exposed length of the wick, thus maintaining a constant burning temperature and rate of fuel consumption. Some wicks require regular trimming with scissors (or a specialized wick trimmer), usually to about one-quarter inch (~0.7 cm), to promote slower, steady burning, and also to prevent smoking. In early times, the wick needed to be trimmed quite frequently, and special candle-scissors, referred to as "snuffers" until the 20th century, were produced for this purpose, often combined with an extinguisher. In modern candles, the wick is constructed so that it curves over as it burns (see picture on the right), so that the end of the wick gets oxygen and is then consumed by fire—a self-trimming wick.

Përbërësit

Dylli

The hydrocarbon C₃₁H₆₄ is a typical component of paraffin wax, from which most modern candles are produced.

Unlit candles

Candles were once made from tallow and beeswax until after about 1853, they were made mainly from spermaceti and purified animal fats (stearin). Today, most candles are made from paraffin wax. Candles can also be made from beeswax, soy, other plant waxes, and tallow (a by-product of beef-fat rendering). Gel candles are made from a mixture of mineral oil and a polymer.

The candle can be made of

• paraffin (a product of petroleum refining)
• microcrystalline wax
• stearin (now produced almost exclusively from palm waxes though initially manufactured from animal fats)
• beeswax (a byproduct of honey collection)
• gel (a mixture of polymer and mineral oil)
• some plant waxes (generally palm, carnauba, bayberry, or soybean wax)
• tallow (rarely used since the introduction of affordable and cheap wax alternatives)
• spermaceti (extracted from the head of a Sperm Whale)

The size of the flame and corresponding rate of burning is controlled largely by the candle wick.

Production methods utilize extrusion moulding. More traditional production methods entails melting the solid fuel by the controlled application of heat. The liquid is then poured into a mould or a wick is repeatedly immersed in the liquid to create a dipped tapered candle. Often fragrance oils, essential oils or aniline-based dye is added.

Fitili

A candle wick works by capillary action, drawing ("wicking") the melted wax or fuel up to the flame. When the liquid fuel reaches the flame, it vaporizes and combusts. The candle wick influences how the candle burns. Important characteristics of the wick include diameter, stiffness, fire-resistance, and tethering.

A candle wick is a piece of string or cord that holds the flame of a candle. Commercial wicks are made from braided cotton. The wick's capillarity determines the rate at which the melted hydrocarbon is conveyed to the flame. If the capillarity is too great, the molten wax streams down the side of the candle. Wick are often infused with a variety of chemicals to modify its burning characteristics. For example, it is usually desirable that the wick not glow after the flame is extinguished. Typical agents are ammonium nitrate and ammonium sulfate.

Karakteristikat

Drita

A room lit up in the glow of many candles

Based on measurements of a taper-type, paraffin wax candle, a modern candle typically burns at a steady rate of about 0.1 g/min, releasing heat at roughly 80 W. The light produced is about 13 lumens, for a luminous efficacy of about 0.16 lumens per watt (luminous efficacy of a source) – almost a hundred times lower than an incandescent light bulb.

The luminous intensity of a typical candle is thus approximately one candela. The SI unit, candela, was in fact based on an older unit called the candlepower, which represented the luminous intensity emitted by a candle made to particular specifications (a "standard candle"). The modern unit is defined in a more precise and repeatable way, but was chosen such that a candle's luminous intensity is still about one candela.

Temperatura

Shiko gjithashtu artikullin Combustion

The hottest part of the flame is just above the very dull blue part to one side of the flame, at the base. At this point, the flame is about 1,400 °C. However note that this part of the flame is very small and releases little heat energy. The blue color is due to chemiluminescence, while the visible yellow color is due to radiative emission from hot soot particles. The soot is formed through a series of complex chemical reactions, leading from the fuel molecule through molecular growth, until multi-carbon ring compounds are formed. The thermal structure of a flame is complex, hundreds of degrees over very short distances leading to extremely steep temperature gradients. On average, the flame temperature is about 1,000 °C. The color temperature is approximately 1,000 K.

Flaka e qiririt

Candle flame with zones marked

A candle flame has three distinct regions. The innermost zone, directly above the wick contains wax vapors that have just been vaporized. The middle zone, the yellow portion of the flame is an oxygen depleted zone, where partial oxidation has occurred, but insufficient oxygen exists to burn all of the vapors present. The temperature in this region is hotter than the innermost zone, but cooler than the outer zone. The outer zone is the area where the flame is the hottest and the oxidation process is complete.

Historia e studimimit

One of Michael Faraday's significant works was The Chemical History of a Candle, where he gives an in-depth analysis of the evolutionary development, workings and science of candles.

Rreziqet

According to the U.S. National Fire Protection Association, candles are one of the leading sources of residential fires in the U.S. with almost 10% of civilian injuries and 6% of civilian fatalities from fire attributed to candles.

A candle flame that is longer than its laminar smoke point will emit soot. Soot inhalation has known health hazards. Proper wick trimming will substantially reduce soot emissions from most candles.

The liquid wax is hot and can cause skin burns, but the amount and temperature are generally rather limited and the burns are seldom serious. The best way to avoid getting burned from splashed wax is to use a candle snuffer instead of blowing on the flame. A candle snuffer is usually a small metal cup on the end of a long handle. When placed over the flame the oxygen supply is cut off. They were used daily when the candle was the main source of lighting a home, before electric lights were available.

Glass candle holders are sometimes cracked by thermal shock from the candle flame, particularly when the candle burns down to the end. When burning candles in glass holders or jars, users should avoid lighting candles with chipped or cracked containers, and stop use once 1/2 inch or less of wax remains.

A former worry regarding the safety of candles was that a lead core was used in the wicks to keep them upright in container candles. Without a stiff core, the wicks of a container candle could sag and drown in the deep wax pool. Concerns rose that the lead in these wicks would vaporize during the burning process, releasing lead vapors — a known health and developmental hazard. Lead core wicks have not been common since the 1970s. Today, most metal-cored wicks use zinc or a zinc alloy, which has become the industry standard. Wicks made from specially treated paper and cotton are also available.

Rregullimet

Candles and candle accessories pose a risk to property and people. Risk can be reduced by ensuring products comply with international standards.

Protecting consumers must be a priority for manufacturers, buyers, importers and retailers of candles and their accessories. International markets have developed a range of Standards and Regulations to ensure compliance, at the same time as maintaining and improving safety, including:

• Europe: GPSD, EN 15493, EN 15494, EN 15426, EN 14059, REACH, RAL-GZ 041 Candles (Germany), French Decree 91-1175
• USA: ASTM F2058, ASTM F2179, ASTM F2417, ASTM F2601, ASTM F2326, California Proposition 65, CONEG
• China: QB/T 2119 Basic Candle, QB/T 2902 Art Candle, QB/T 2903 Jar Candle, GB/T 22256 Jelly Candle

Paisjet shtesë

Qirimbajtësit

Candle on table in Wine cellar

A candle in a candle stick

Decorative candle holders, especially those shaped as a pedestal, are called candlesticks; if multiple candle tapers are held, the term candelabrum is also used. The root form of chandelier is from the word for candle, but now usually refers to an electric fixture. The word chandelier is sometimes now used to describe a hanging fixture designed to hold multiple tapers.

Many candle holders use a friction-tight socket to keep the candle upright. In this case, a candle that is slightly too wide will not fit in the holder, and a candle that is slightly too narrow will wobble. Candles that are too big can be trimmed to fit with a knife; candles that are too small can be fitted with aluminium foil. Traditionally, the candle and candle holders were made in the same place, so they were appropriately sized, but international trade has combined the modern candle with existing holders, which makes the ill-fitting candle more common. This friction tight socket is only needed for the federals and the tapers. For tea light candles, there are a variety of candle holders, including small glass holders and elaborate multi candle stands. The same is true for votives. Wall sconces are available for tea light and votive candles. For pillar type candles, the assortment of candle holders is broad. A fireproof plate, such as a glass plate or small mirror, is a candle holder for a pillar style candle. A pedestal of any kind, with the appropriate-sized fireproof top, is another option. A large glass bowl with a large flat bottom and tall mostly vertical curved sides is called a hurricane. The pillar style candle is placed at the bottom center of the hurricane. A hurricane on a pedestal is sometimes sold as a unit.

A bobèche is a drip-catching ring, which may also be affixed to a candle holder, or used independently of one. They can range from ornate metal or glass, to simple plastic, cardboard, or wax paper. Use of paper or plastic bobèches is common at events where candles are distributed to a crowd or audience, such as Christmas carols or other concerts/festivals.

Candle followers

These are glass or metal tubes with an internal stricture partway along, which sit around the top of a lit candle. As the candle burns, the wax melts and the follower holds the melted wax in, whilst the stricture rests on the topmost solid portion of wax. Candle followers are often deliberately heavy or 'weighted', to ensure they move down as the candle burns lower, maintaining a seal and preventing wax escape. The purpose of a candle follower is threefold:

• To contain the melted wax – making the candle more efficient, avoiding mess, and producing a more even burn
• As a decoration – either due to the ornate nature of the device, or (in the case of a glass follower) through light dispersion or colouration
• And sometimes to shield the flame from wind.

Candle followers are often found in churches on altar candles.

Qirishuajtësit

Candle snuffers are instruments used to extinguish burning candles by smothering the flame with a small metal cup that is suspended from a long handle, and thus depriving it of oxygen. An older meaning refers to a scissor-like tool used to trim the wick of a candle. With skill, this could be done without extinguishing the flame. The instrument now known as a candle snuffer was formerly called an "extinguisher" or "douter".

Etimologjia

The word candle comes from Middle English candel, from Old English and from Anglo-Norman candele, both from Latin candla, from candre, to shine.

Historia

Bees wax candles from the alemannic Stampa:Ill, Germany dating to 6th/7th century A.D. The oldest surviving bees wax candles north of the Alps.

The earliest known candles originated in China around 200 BC, and were made from whale fat. Candles did not appear in Europe or the Middle East until sometime after AD 400, due largely to the availability of olive oil for burning in lamps. The early European candle was made from various forms of natural fat, tallow, and wax. In the 18th century, spermaceti, oil produced by the sperm whale, was used to produce a superior candle. Late in the 18th century, colza oil and rapeseed oil came into use as much cheaper substitutes.

Until of late years, candles were solely manufactured from bees' wax, spermaceti, or tallow. The application of scientific chemical research...all the best candles are now made from the pure solid and crystallizable margaric and stearic acids. These are freed from the fluid oleic acid, and from glycerine, which exist in combination with them in ordinary tallow, as well as from other analogous substances, as from paraffin (a carbo-hygroneous substance resembling spermaceti, prepared from tar and peat), the stearic and margaric acid in the cocoa-nut oil and the palm oil, besides the old substance spermaceti, and wax both vegetable and animal.

— Candles, -Eighth edition, Encyclopedia Britannica, 1853

Paraffin was first distilled in 1830, and revolutionized candle-making, as it was an inexpensive material which produced a high-quality, odorless candle that burned reasonably cleanly. The industry was devastated soon after, however, by the distillation of kerosene (confusingly also called paraffin oil or just paraffin). Recently resin based candles that are freestanding and transparent have been developed, with the claim that they burn longer than traditional paraffin candles. They are usually scented and oil based.

In the Middle Ages in Europe, tallow candles were the most common candle. By the 13th century, candle making had become a guild craft in England and France. The candle makers (chandlers) went from house to house making candles from the kitchen fats saved for that purpose, or made and sold their own candles from small candle shops.

Timekeeping

An advent candle burning on the fourth day of December.

With the fairly consistent and measurable burning of a candle, a common use was to tell the time. The candle designed for this purpose might have time measurements, usually in hours, marked along the wax. The Song dynasty in China (960–1279) used candle-clocks. By the 18th century, candle-clocks were being made with weights set into the sides of the candle. As the candle melted, the weights fell off and made a noise as they fell into a bowl. A form of candle-clock was used in coal-mining until the 20th century.

In the days leading to Christmas some people burn a candle a set amount to represent each day, as marked on the candle. The type of candle used in this way is called the Advent candle, although this term is also used to refer to a candle that decorates an Advent wreath.

Përdorimi

Shiko gjithashtu artikullin Ceremonial use of lights#Candles

Before the invention of electric lighting, candles and oil lamps were commonly used for illumination. In areas without electricity, they are still used routinely. Until the 20th century, candles were more common in northern Europe. In southern Europe and the Mediterranean, oil lamps predominated. In the developed world today, candles are used mainly for their aesthetic value and scent, particularly to set a soft, warm, or romantic ambiance, for emergency lighting during electrical power failures, and for religious or ritual purposes. Scented candles are used in aromatherapy. Some have even gone so far as to make candles scented with racing two-stroke motorcycle oil.

Shih edhe

• Candle warmer
• Candelabra
• Julleuchter
• Rushlight
• Singing candle
• Tealight
• Trick candles
• Trudon
• Unity candle

Lidhje të jashtme

Wikimedia Commons ka materiale multimediale në lidhje me: Candles

 Wikiquote: Candles – Citate

• National Candle Association of the U.S.
• The Chemical History of a Candle by Michael Faraday
• Association of European Candlemakers(AECM)
• European Candle Association (ECA)
• Latin American Candle Manufacturers Association (ALAFAVE)

Candle wax can be made of a few different substances. Paraffin is the most common and cheapest type of wax. Soy is a paraffin alternative that was created to be better for the environment. It is softer and usually has a low melting point. Beeswax is the most expensive and hardest to find. Gel wax is made of mineral oil and resin.